industrialshredders.pkLahore, Pakistan   ·   0331 9845678
TS-50 laboratory shredder with a yellow cabinet and sample collection tray
TS-50 laboratory shredder. Confirm the supplied equipment and final configuration with your quotation.
Laboratory and R&D

TS-50

Laboratory shredder

Small samples. Useful next steps. The TS-50 is intended for laboratory shredding and research work, with a 100 mm blade length and a focus on material preparation.

Blade length
100 mm
Intended use
Laboratory R&D

Begin with your sample and the next test. Agree the material suitability, machine ratings and required output before ordering.

Ask about TS-50
View specifications
Research begins with the sample

Prepare material for
the next stage.

Use the TS-50 as the starting point for a discussion about small batches, polymer research, recycling studies and early process evaluation. The right brief includes the material grade, sample dimensions, batch quantity and the result your next step needs.

A laboratory requirement is often about recovering a useful sample and understanding its behaviour. Agree those criteria before relying on a general throughput figure.

Plan your laboratory application

A compact laboratory format

  • A confirmed blade length of 100 mm.
  • A desktop machine format with a separate collection tray in the supplied photograph.
  • A visible intermeshing cutter arrangement and transparent upper panels.
  • Front controls and a separate control display shown on the machine.

The photograph shows the arrangement. Control functions, speed range, guarding and electrical protection are confirmed with the final technical specification.

Start with a representative sample

A clear material brief.

The intended laboratory scope begins with lightweight plastics, paper and cardboard. Identify the actual material and thickness so the configuration can be assessed for the sample you will use.

Lightweight plasticsPaperCardboardPolymer research

Rubbers, elastomers and composite samples need individual assessment. Include hardness, fillers, fibres and any reinforcement in your enquiry. Light metal capability has not been established for TS-50.

Discuss a laboratory sample

Define what a useful result looks like

  • Identify each material grade and any contamination.
  • State the largest sample dimensions and the quantity per batch.
  • Describe the output required by the next research or test process.
  • Agree how sample recovery, carryover and cleaning will be assessed.
  • Confirm the operating duty and the facilities available in the laboratory.

Shredding is one preparation step. A specific analytical particle size may require further processing and its own acceptance check.

Technical details

TS-50 specifications

The blade length and laboratory purpose are confirmed. Remaining ratings require a TS-50 technical specification.
Blade Length100 mm
Intended UseLaboratory research and development
Drive ConfigurationTo be confirmed
Main Drive PowerTo be confirmed
Output TorqueTo be confirmed
Main Shaft DiameterTo be confirmed
Shaft Operating SpeedTo be confirmed
Cutter / Rotor SizeTo be confirmed
Cutter ThicknessTo be confirmed
Cutting Chamber SizeTo be confirmed
Processing CapacityTo be confirmed
Machine WeightTo be confirmed
Overall Dimensions (L × W × H)To be confirmed
Electrical SupplyTo be confirmed
Maximum Feed SizeTo be confirmed for the sample and configuration
Output SizeTo be agreed for the sample and next process
Cutter steelTo be confirmed
Shaft materialTo be confirmed

Blade length does not establish the feed opening, rotor diameter or maximum sample dimensions. Motor power, torque and throughput cannot be determined from the photograph.

COMMAT Advanced Technologies · +92 331 9845678 · info@industrialshredders.pk
Phase II, DHA, Lahore · https://industrialshredders.pk/shredders/ts-50/

What will your next laboratory batch involve?

Tell us about the sample, the research task and the result you need.

Discuss your requirement