Describe the feed as it really arrives

Name the material and describe its normal condition. Include the largest piece, its thickness, whether the material is loose or compacted and what else may be attached to it. Photographs help, particularly when a material name covers several very different products.

If the feed changes between batches, record the range. A machine selection based only on the cleanest or smallest sample may not represent the job you need it to do.

  • Material type and any known grade
  • Largest dimensions and typical piece size
  • Contamination, attachments and moisture
  • Normal variation between batches

Define what the output is for

Reduction in size is not a complete output specification. Explain whether the material will be easier to handle, sent to another machine or prepared for a particular recycling process. If the next stage has a size requirement, include it.

Also state how the output will be collected and moved. The machine needs to be considered within the space and process around it.

Compare the machine families

The TS range uses twin shaft configurations, with single motor and dual motor groups. The RP range uses a ram fed single shaft arrangement. These are useful starting categories, but neither the number of motors nor the family name proves suitability for a particular feed.

Use the family pages to compare the relevant model specifications. Read chamber dimensions, cutter or rotor details, operating speed, drive power and footprint together. Check whether any value still needs confirmation before ordering.

Put throughput into context

An indicative kilograms per hour figure helps describe the range. It should not be treated as a promise for every material or output size. Feed condition, the way the machine is loaded and the required result all need to be agreed.

Give your target as a practical requirement, such as the quantity generated during a shift and the hours available to process it. Discuss the intended duty and how performance will be confirmed.

Prepare a useful enquiry

Send your material description, photographs, city, output requirement and expected operating pattern. Add a model code if you have shortlisted one. If you have not, the same information still provides a useful basis for discussion.

Before placing an order, confirm the final specification, included items, supply requirements, commercial terms and any agreed acceptance conditions in writing.

  • Compare the model specifications
  • Record unresolved dimensions or values
  • Discuss the actual feed and required output
  • Confirm the agreed configuration before ordering

When the work begins in a laboratory

For research batches, define the sample size, material and next test before using an industrial throughput figure as a selection target. TS-50 is the laboratory model in this range, with a confirmed 100 mm blade length. Its remaining machine ratings and suitability for your sample must be agreed in the technical configuration.

For research batches, explore the TS-50 laboratory shredder and our laboratory sample preparation guide.

Put the guidance to work

Explore all 22 shredder models, compare their specifications or send your requirement to COMMAT.