Begin with the material
Record the material type, its dimensions and its condition. A loose batch of packaging and a dense solid offcut can differ substantially even when their total weight is the same. The shape and consistency of the feed need to be part of the performance discussion.
If your material is mixed, describe the normal mix and the range of variation. A throughput requirement should represent everyday operation rather than one unusually easy batch.
Define the output requirement
The intended result matters. State the required output size or form and explain what will happen to it next. Without that information, two capacity figures may describe different jobs.
Where a screen or another configuration choice is relevant, confirm the final arrangement being discussed. Do not compare figures from different configurations as if they were identical.
Describe the operating pattern
Tell the supplier how the feed will reach the machine, how many hours it will run and how the output will be removed. Include normal pauses and batch changes when describing the work.
Distinguish the amount of material generated in a shift from the hours actually available for processing. If a site generates 800 kilograms and allows four processing hours, its average planning requirement is 200 kilograms per processing hour. This is a planning calculation, not proof that any particular model will achieve it.
- Material generated during the shift
- Hours available for processing
- Expected variation in the feed
- Loading and collection arrangements
Use model figures to build a shortlist
The product pages present the available indicative capacity ranges alongside drive power, cutting dimensions and machine size. Read those details together and note any specification that remains to be confirmed.
Avoid selecting a machine solely because the upper end of an indicative range matches your target. Discuss the actual feed, required output and operating duty before agreeing the final selection.
Agree how performance will be confirmed
Where trials are needed, agree the sample, feed condition, output requirement and the way the result will be recorded. The material used should represent the job you intend to run.
Keep the agreed specification and acceptance conditions with the quotation or order. Clear conditions are more useful than a general promise of high capacity.
For research batches, explore the TS-50 laboratory shredder and our laboratory sample preparation guide.
Put the guidance to work
Explore all 22 shredder models, compare their specifications or send your requirement to COMMAT.